Macro Global Description - Cisco Catalyst 2960 Command Reference Manual

Chapter 2 Catalyst 2960 Switch Cisco IOS Commands

macro global description

Use the macro global description global configuration command to enter a description about the
macros that are applied to the switch. Use the no form of this command to remove the description.
Syntax Description description text
Defaults
This command has no default setting.
Command Modes Global configuration
Command History Release
12.2(25)FX
Usage Guidelines Use the description keyword to associate comment text, or the macro name, with a switch. When
multiple macros are applied on a switch, the description text will be from the last applied macro.
This example shows how to add a description to a switch:
Switch(config)# macro global description udld aggressive mode enabled
You can verify your settings by entering the show parser macro description privileged EXEC
command.
Related Commands Command
macro apply
macro description
macro global
macro name
show parser macro
OL-8604-03
macro global description text
no macro global description text
Enter a description about the macros that are applied to the switch.
Modification
This command was introduced.
Description
Applies a macro on an interface or applies and traces a macro on an
interface.
Adds a description about the macros that are applied to an interface.
Applies a macro on a switch or applies and traces a macro on a switch.
Creates a macro.
Displays the macro definition for all macros or for the specified macro.
macro global description
Catalyst 2960 Switch Command Reference
2-197