Table of Contents
Advertisement
Performing a Confidence Test
This first measurement is a confidence test that functionally checks the
N5500A test set's filters and low-noise amplifiers using the test set's low noise
amplifier. The phase detectors are not tested. This confidence test also
confirms that the test set, PC, and analyzers are communicating with each
other. To conduct the test, use a file with pre-stored parameters named
Confidence.pnm.
1
2
3
4
E5500_open_win_conf
04 Apr 04 rev 1
Figure 6
5
Agilent E5505A User's Guide
On the E5500 GUI main menu, select File\Open.
If necessary, choose the drive or directory where the file you want is stored.
In the File Name box, select Confidence.pnm
Click the Open button.
Opening the file containing pre-stored parameters
The appropriate measurement definition parameters for this example have
been pre-stored in this file.
has been entered for the N5500A confidence test example.
To view the parameter data in the software, navigate to the Define
Measurement window. Use
parameter data is entered using the tabbed windows. Select various tabs to
see the type of information entered behind each tab.
Introduction and Measurement
(Figure
Table 3
on page 44 lists the parameter data that
Figure 7
on page 40 as a navigation guide. The
2
6).
39
Advertisement
Table of Contents
