Table of Contents
Advertisement
19
PC Components Installation
Accessing PC expansion slots
Figure 313
computer's expansion slots may be horizontally mounted, but the process is
the same.
1
2
Expansion slot(s)
Figure 313 Vertically-Mounted expansion slots
Taking ESD precautions
The PC Digitizer and GPIB interface cards are static-sensitive devices. Wear a
C A UTI ON
properly grounded wrist or foot strap while handling the cards and performing the
procedures in this section. Failure to do so can result in damage to the electronic
devices and assemblies involved.
While inserting the cards, be sure to hold them by the edges.
410
shows a view of the expansion slots vertically mounted; your
Look for suitable expansion slots for both the PC digitizer card and the
GPIB interface card. Choose slots that provide good external access to the
PC Digitizer and GPIB interface connectors. You may want to leave an
empty expansion slot between the cards for easier internal access.
Remove their cover plates by unscrewing the securing screw and lifting
them off the slot. (Save the blank cover plates for use if the cards are
removed later.)
Grounding
wrist strap
Agilent E5505A User's Guide
Advertisement
Table of Contents
