Table of Contents
Advertisement
A
Service, Support, and Safety Information
Safety and Regulatory Information
Safety summary
The following general safety precautions must be observed during all phases of
operation of this instrument or system. Failure to comply with these
precautions or with specific warnings elsewhere in this manual violates safety
standards of design, manufacture, and intended use of this instrument or
system. Agilent Technologies, Inc. assumes no liability for the customer's
failure to comply with these requirements.
General
This product has been designed and tested in accordance with the standards
listed on the Manufacturer's Declaration of Conformity, and has been supplied
in a safe condition. The documentation contains information and warnings
that must be followed by the user to ensure safe operation and to maintain the
product in a safe condition.
All light-emitting diodes (LEDs) used in this product are Class 1 LEDs per IEC
60825-1.
Equipment Installation
Install the instrument or system so that the detachable power cord is readily
identifiable and is easily reached by the operator. The detachable power cord
is the disconnecting device. It disconnects the mains circuits from the mains
supply before other parts of the instrument or system. The instrument front
panel switch is only a standby switch and is not a LINE switch. Alternatively,
an externally installed switch or circuit breaker (which is readily identifiable
and is easily reached by the operator) may be used as a disconnecting device.
This is a Safety Class 1 Product (provided with a protective earthing ground
WA RN IN G
incorporated in the power cord). The mains plug shall be inserted only in a socket
outlet provided with a protective earth contact. Any interruption of the protective
conductor inside or outside of the products is likely to make the product
dangerous. Intentional interruption is prohibited (IEC 348 clauses 17.3.3 c and
17.3.4).
DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE.
WA RN IN G
Do not operate the instrument or system in the presence of flammable gases or
flames.
468
Agilent E5505A User's Guide
Advertisement
Table of Contents
