Table of Contents
Advertisement
13
Baseband Noise Measurement Examples
Baseband Noise without Test Set Measurement Example
This measurement example will help you measure the noise voltage of a
source.
To ensure accurate measurements allow the DUT and measurement equipment to warm up
NO T E
at least 30 minutes before making the noise measurement.
Defining the measurement
1
2
3
e5505a_select_param_def_file_89410
27 Jun 04 rev 3
Figure 254 Select the parameters definition file
4
318
From the File menu, choose Open.
If necessary, choose the drive or directory where the file you want is stored.
In the File Name box, choose "BBnoise_without_testset_89410.pnm."
Click the Open button. The appropriate measurement definition
parameters for this example have been pre-stored in this file.
page 321 lists the parameter data in this file.
Table 50
on
Agilent E5505A User's Guide
Advertisement
Table of Contents
