18
System Interconnections
4
Do not make a GPIB connection with an oscilloscope. Doing so causes the E5505A
C A UTI ON
system to malfunction and may result in damage.
For easy re-installation, label each end of each cable with the corresponding instrument
NO T E
connector names.
5
6
400
Connect cables to other instruments with the appropriate connectors and
adapters, using the tables and diagrams in this section. (Refer to
on page 401 through
Figure 309
•
Install a GPIB extension on these system instruments before connecting
the GPIB cable: N5500A/01A/02A/07A/08A.
You may connect other assets (in addition to those supplied with the
system) either at this time or after running the confidence test.
Lastly, connect the power cord(s) to the AC power supply.
on page 403.)
Agilent E5505A User's Guide
Figure 307