19
PC Components Installation
Measurement Software Installation
Use this procedure to re-install the E5500 software on your system PC.
To install the E5500 software
Step
1 Make sure your PC and display are on and the
2 Navigate to the CD-ROM contents folder using
3 Double-click on Setup.exe.
e5500_setup_exe
rev 1 24 jun 04
4 Follow the instructions in the installation
424
E5500 Phase Noise Measurement System
software CD-ROM is in the PC's CD-ROM
drive.
the menu selections Start/Run/Browse, and
select the CD-ROM drive.
wizard.
Note
•
You can also open and close the CD-ROM
drive to cause a window with the CD-ROM
contents folder to appear.
•
Accept the default settings.
Agilent E5505A User's Guide