Table of Contents
Advertisement
e5505a_user_connect_free_osc
24 Jun 04 rev 3
Figure 140 Connect diagram for the microwave source measurement
4
A
The test set's signal input is subject to the limits and characteristics in
C A UTI ON
To prevent damage to the test set's hardware components, do not apply the input
signal to the test set's signal input connector until the input attenuator (Option 001)
has been set by the phase noise software, which will occur when the connection
diagram appears.
Agilent E5505A User's Guide
TEST SET
N5500A
Connect your DUT and reference sources to the test set at this time.
Confirm your connections as shown in the connect diagram.
•
The input attenuator (Option 001 only) is now correctly configured
based on your measurement definition.
Absolute Measurement Examples
DOWNCONVERTER
N5502A
6
Table
27.
193
Advertisement
Table of Contents
