2
E5500_new_cali_meas
04 A
Figure 171 Confirm new measurement
3
e5505a_user_setup_diag_amp_meas_ex
24 Jun 04 rev 3
Figure 172 Setup diagram for the 8349A amplifier measurement example
4
Agilent E5505A User's Guide
When the Do you want to perform a New Calibration and Measurement?
prompt appears, click Yes.
04
1
When the Connect Diagram dialog box appears, click on the hardware
down arrow and select your hardware configuration from the pull-down
list. Refer to
Figure
172.
Connect your DUT and reference sources to the test set at this time.
Confirm your connections as shown in the appropriate connect diagram.
•
The input attenuator (Option 001 only) is now correctly configured
based on your measurement definition.
Residual Measurement Examples
8
235