Table of Contents
Advertisement
Agilent system cabinet power strips are equipped with a thermal circuit
breaker for each power phase. If one phase shorts or overloads, one or both of
the circuit breakers in the power strip trip. Unplug the power strip before
trying to locate and correct the electrical problem, then reset both circuit
breakers on the power strip to restore power to the cabinet.
Maintenance
To prevent electrical shock, disconnect the instrument and/or system from
WA RN IN G
mains before cleaning. Use a dry cloth or one slightly dampened with water to
clean the external case parts. Do not attempt to clean internally.
Safety symbols and instrument markings
Symbols and markings in manuals and on instruments alert you to potential
risks, provide information about conditions, and comply with international
regulations.
manual or on an instrument.
Table 77 Safety symbols and instrument markings
Safety symbols
Agilent E5505A User's Guide
Table 77
defines the symbols and markings you may find in a
Definition
Warning: risk of electric shock.
Warning: hot surface.
Caution: refer to instrument documentation.
Laser radiation symbol: marked on products that have a laser
output.
Alternating current.
Both direct and alternating current.
Three-phase alternating current.
Earth (ground) terminal.
Protective earth (ground) terminal.
Frame or chassis terminal.
Service, Support, and Safety Information
A
471
Advertisement
Table of Contents
