20
PC Digitizer Performance Verification
Verifying PC Digitizer Card Output Performance
This procedure verifies the output performance of the PC digitizer card and
adapter. Perform this procedure periodically to ensure the proper functioning
of these two components, which affect measurement accuracy.
Required equipment
• Multimeter or oscilloscope (for reading output voltage)
To verify the PC digitizer card input's performance
Step
1 Turn off the phase noise software.
2 Connect the PC digitizer card adapter's
444
output to the input of either a multimeter or
oscilloscope.
e5505a_digop_conn1
rev 1 24 jun 04
Notes
•
See connection diagram below.
Agilent E5505A User's Guide