Table of Contents
Advertisement
3
E5500_verify_con
23 Mar 04 rev 1
Figure 93 Connect diagram for the stable RF oscillator measurement
4
The test set's signal input is subject to the limits and characteristics in
C A UTI ON
page 138.
Agilent E5505A User's Guide
When the Connect Diagram dialog box appears, click on the hardware
pull-down arrow and select your hardware configuration from the list.
Connect your DUT and reference sources to the test set at this time.
Confirm your connections as shown in the connect diagram.
•
The input attenuator (Option 001 only) is now correctly configured
based on your measurement definition.
Absolute Measurement Examples
Table 15
6
on
137
Advertisement
Table of Contents
