Table of Contents
Advertisement
19
PC Components Installation
Hardware Installation
Disconnect all power before removing the cover to your PC. Failure to disconnect
WA RN IN G
power could result in serious injury.
Refer to your computer's documentation for installation safety instructions and
C A UTI ON
specific instructions for opening your computer. Be sure to perform these
procedures in a properly grounded environment. Agilent recommends wearing
grounding wrist or foot straps. Failure to do so may result in damage to the
computer.
Preparing for installation
You need a #1 POZIDRIV screwdriver to install hardware in the system PC.
1
2
3
Grounding
wrist strap
Figure 310 Remove screws from side of CPU
408
Make sure that your PC and all its peripherals are powered off.
Disconnect the power cord from the PC.
Remove the cover from the PC to access the PC's expansion slots. See the
PC manufacturer's documentation for instructions.
To remove the cover of the N5505A system Advantech PC:
a
Remove the top two screws on the left and right sides of the PC.
1
2
Agilent E5505A User's Guide
Advertisement
Table of Contents
