Table of Contents
Advertisement
10
E5500_add_source8
16 Apr 04 rev 1
Figure 27 Click check-mark button
• The Asset Manager displays a message verifying the connection to your
E5500_add_source9
16 Apr 04 rev 1
Figure 28 Confirmation message
11
12
Agilent E5505A User's Guide
In the Asset Manager window, select the source in the left window pane.
Click the check-mark button on the toolbar to verify connectivity. See
Figure
27.
asset. This indicates that you have successfully configured a source. (See
Figure
28.)
To exit the Asset Manager, on the menu select Server/Exit.
Perform the procedure
the Source"
on page 60.
Expanding Your Measurement Experience
"Using the Server Hardware Connections to Specify
4
59
Advertisement
Table of Contents
