Table of Contents
Advertisement
A
Service, Support, and Safety Information
Shipping the instrument
Use the following procedure to package and ship your instrument for service.
For instructions on removing an instrument from the system and re-installing
it, refer to the system user's guide.
To package the instrument for shipping
Step
1 Place the instrument in its original packaging
2 Surround the instrument with at least 3 to 4
3 After wrapping it with packing material, place the
4 Seal the shipping container securely with strong
5 Mark the shipping container "FRAGILE, HANDLE
6 Use the address obtained from your Agilent
7 Retain copies of all shipping papers.
Damage can result if the original packaging materials are not used. Packaging
C A UTI ON
materials should be anti-static and cushion the downconverter on all sides. NEVER
USE STYRENE PELLETS IN ANY SHAPE AS PACKAGING MATERIALS. They do not
adequately cushion the instrument or prevent it from moving in the shipping
container. Styrene pellets can also cause equipment damage by generating static
electricity or by lodging in fan motors.
476
materials.
inches of its original packing material or
bubble-pack to prevent the instrument from
moving in its shipping container.
instrument in its original shipping container or a
strong shipping container that is made of
double-walled corrugated cardboard with 159 kg
(350 lb) bursting strength.
nylon adhesive tape.
WITH CARE" to help ensure careful handling.
customer engineer.
Notes
•
If the original packaging materials are
not available, use a professional
packaging service. Contact your Agilent
Service Center for more information.
•
The shipping container must be large
and strong enough to accommodate
your instrument and allow at least 3 to 4
inches on all sides for packing material.
Agilent E5505A User's Guide
Advertisement
Table of Contents
