Table of Contents
Advertisement
Defining the measurement
1
2
3
e5505a_user_select_param_def_file_AM
27 Jun 04 rev 3
Figure 238 Select the parameters definition file
4
The amplitude of a source under system control, for an AM noise measurement, will
NO T E
automatically be set to +10 dBm. If any other amplitude is desired, the source should be
placed under manual control. All other measurements set the source to +16 dBm
automatically.
5
6
Agilent E5505A User's Guide
From the File menu, choose Open.
If necessary, choose the drive or directory where the file you want is stored.
In the File Name box, choose "AM_noise_1ghz_8644b.pnm." See
Figure
238.
Click the Open button.
•
The appropriate measurement definition parameters for this example
have been pre-stored in this file.
parameter data that has been entered for this measurement example.
From the Define menu, choose Measurement; then choose the Type and
Range tab from the Define Measurement window.
From the Measurement Type pull-down, select AM Noise. See
page 304
AM Noise Measurement Examples
Table 48
on page 311 lists the
12
Figure 239
on
303
Advertisement
Table of Contents
