To Test The 4349B; Performing A Self-Test; Testing The Front Panel Keys' Functionality - Agilent Technologies 4349B Manual

To Test the 4349B

Performing a Self-Test

The 4349B has a self-test function to check its basic performance.
1. Press .
2. Select using
message is displayed, refer to \Messages" back of this manual.
3. Select and press

Testing the Front Panel Keys' Functionality

The 4349B has a service function to test the functionality of the front panel keys (as well as
the handler interface, the ROM, the RAM, and the EEPROM).
This section describes how to test the front panel keys' functionality.
(For the handler interface test, refer to Chapter 9 for the procedure. The other tests are for
use by service personnel only.)
1. Press .
2. Select using
3. Select using
4. Press the front panel key that you want to test.
For example, if you want to test
When the key functions properly,
be no such display, and the key is not functioning correctly. Contact your nearest Agilent
Technologies oce.
5. To exit the front panel key test, press
6. Select and press
2-16 Operating the 4349B
or , and press
to exit.
or and press
or and press
, press
to exit.
to execute the self test. If any error
.
.
.
is displayed; otherwise, there will
twice.
4349B