1.Main modification mode functions
Function
Modifying the
stitching start
position ([11]-5)
Deleting a stitch
([11]-7)
Adding a stitch
([11]-11)
Modifying the
stitch position
([11]-15)
Moving a block
([11]-19)
Modifying a
block
([11]-23)
Modifying stitch
length
([11]-39)
Modifying material
step
([11]-43)
Modifying the stitching
speed
([11]-46)
Modifying code data
([11]-50)
2.Entering the modification mode
▪
Press
Standard screen to enter the modification
mode.
Method that uses standard screen
[11] Modification mode
icon
The stitching start position
moves.
Deletes the designated stitch.
Data for one stitch is added at
designated position
The position of the stitch is
modified
Data in a designated range is
moved.
The area between two points
to be modified is modified with
linear, broken line, arc, curve,
zigzag or feed data.
The stitch length in the
designated range is modified.
The presser foot height at the
specified position is modified.
The stitching speed is modified
from the designated stitch.
Code data is added to or
deleted from designated stitch
position.
and
on the
Details
▪
press
and
enter the modification mode.
Method that uses data input mode
[11] - 1
Details setting
-
Designated No. of Stitches
All After Designated Stitch
One Stitch Addition
Same Stitch Addition
<After modification position>
Fixed
Relative Movement
<Prior/Subsequent data>
Change
Add new stitch in between
-
Designated distance modification
All After Designated Stitch
-
Designated No. of Stitches
All After Designated Stitch
Add
Delete
in the input mode to