Reading - Mitsubishi Electric PLK-G-PAL Technical Manual

2.Reading

Operation points
·Select "Read mode" from the menu.
·Select the target (internal memory/USB memory).
·Select the data, and execute reading.
Operation details
(1)Selecting data read
Note Data reading excluding the start position cannot be
executed. Read pattern data after home returning.
►Press
menu mode.
►Press
(2)·Select the target (internal memory/USB memory).
►When the screen first opens, the mode to read from the
internal memory is selected.
(The mode display at the upper left of the screen is
►Press
(The mode can also be changed by pressing
Note If the USB memory is not inserted into the USB
connector, USB memory icon can not be selected.
►If there is a large amount of data, press
change the screen.
(3)Selecting and setting the data
►Press the number of the data to be read, and then press
.
When you read data from the USB memory and
Note
select a data number that already exists in the
internal memory, a message confirming that you
overwrite the data appears. If you do not overwrite
the data, press the
data, press the
►The read data will be displayed.
[ Caution ] When the target is the USB memory, do not remove the USB memory during reading.
(Doing so may result in data damage.)
on the standard screen, and open the
.
to change to reading from the USB memory.
icon. If you overwrite the
icon.
)
)
to
[5] - 2