Back Tacking (Start/End Back Tacking) - Mitsubishi Electric PLK-G-PAL Technical Manual

Application inputs
Various types of stitching, including back tacking, multiple stitching, offset stitching and zigzag stitching can
be carried out. Various types of stitching data can be created by combining the basic inputs and these types.
(Refer to section [9] Table of stitching type combinations.) Note that the application inputs cannot be
combined with point inputs to input data.
Function
Back tacking
([7]-25)
Multiple stitching
([7]-29)
Offset stitching
([7]-32)
Zigzag stitching
([7]-34)

8.Back tacking (start/end back tacking)

[Example] The following type of sewing data will be created.
Operation details
(1)Setting the input method
Set the feed data from the home position to the A
►
point with the procedures for linear input, and open
the Input Method Setting screen.
Press Linear Input
►
Press back tacking
►
Press the back tacking details setting icon
►
Start/end back tacking
Overlap back tacking
Multiple stitching
(Feed data specifications)
Reverse multiple stitching
(Feed data specifications)
.
.
[7] - 25
icon
Multiple stitching
(stitching specifications)
Reverse multiple stitching
(stitching specifications)
With the linear input, the N mode and 3-stitch
back tacking will be inserted for both the start and
end of stitching. (The bold sections indicate
start/end back tacking.)
.