Back Tacking(Overlap Back Tacking) - Mitsubishi Electric PLK-G-PAL Technical Manual

6.Back tacking(Overlap back tacking)

[Example] In the following type of stitching data, the overlap back tacking is converted
(point A-B-C-D-A : Broken line)
Operation details
(1)Selecting back tacking
Enter the conversion mode.
►
Press Back tacking
►
Press
►
(2)Setting the block for converting back tacking
Using jogging, move to the block where back tacking
►
is to be converted.
Press
►
(3)Selecting overlap back tacking
Press overlap back tacking
►
Memo If the selected block is a "closed figure", the
overlap back tacking icon will also appear.
(Selection will be enabled.) This is displayed in
this example. (Selection is possible.)
.
.
.
.
[12] - 5