Mitsubishi Electric PLK-G-PAL Technical Manual page 157

■ Editing combination data
It explains the method of adding and deleting the combination data. It is necessary to write the combination
data after editing.
Delete
(1) The data that wants to be deleted is selected on the
combination mode screen.
(2) Press the key
(3) The selected combination data will be deleted and shifted to
the left one by one.
Stitching data (No.800 in this example) have been deleted.
▬ Deletion operation end ▬
Insert
(1) The place that wants to be inserted is selected on the
combination mode screen.
(2) Press the key
(3) Select the stitching data which you want to add to the
combination, and then press the key
(4) The selected combination data will be inserted and shifted to
the backward one by one. Stitching data (No.801 in this
example) has been added.
▬ Insertion operation end ▬
.
.
.
[13] - 11
Select it
Select the place