Appendix 1. Program Mode List - Mitsubishi Electric MP-J25-PS Technical Manual

APPENDIX 1
1. Wiper
Function
θRC
Perfect stitch motion
mode
θRD
DO NOT USE.
θLL
Judgment angle
(CCW direction)
θLR
Judgment angle
(CW direction)
θDP
DO NOT USE.
θSR
Rotation speed of clamp
θFE
Acceleration and
deceleration distance for
clamp rotation
θRT
Rotation timing of clamp
θJE
Clamp rotation motion
setting in JOG
θBD
Sewing base angle of
clamp
θRP
Setting the clamp rotation
at the specific stitch
position
Program mode list
Unit Setting range
Set the perfect stitch motion mode.
0
1
2
-
3
x0.1
0 to 1800
deg.
x0.1
0 to 1800
deg.
x0.1
0 to 1800
deg.
x0.1
0 to 1800
deg.
- 1 to 100
- 1 to 100
Set the rotation timing of the clamp during automatic sewing.
0
-
1
Set valid/invalid the clamp rotation motion in JOG.
OF
-
ON
x0.1
0 to 3599
deg.
Set to rotate the clamp only at the specific stitch position.
OF
-
MD2
DO NOT USE.
DO NOT USE.
DO NOT USE.
The clamp rotates when the needle is up position.
Valid set the sewing base angle with [θBD].
Valid set the judgement angle with [θLL] and [θLR].
DO NOT USE.
Set the amount of change for sewing direction to rotate clamp.
(CCW direction)
Set the amount of change for sewing direction to rotate clamp.
(CW direction)
DO NOT USE.
Set the rotation speed of the clamp during automatic sewing.
Set the acceleration and deceleration distance for clamp rotation
during automatic sewing.
The clamp rotates after sewing.
The clamp rotates before sewing.
The clamp does not rotate in JOG.
The clamp rotates in JOG.
Set the sewing base angle of clamp during automatic sewing.
The clamp rotates at all stitch positions.
The clamp rotates only at the stitch position of MD2 code.
Specification