Modification Mode; Main Modification Mode Functions - Mitsubishi Electric PLK-J Series Technical Manual

1. Main modification mode functions

Function
Modifying the
stitching start
position
(page [11]-6)
Deleting a
stitch
(page [11]-8)
Adding a stitch
(page [11]-12)
Modifying the
stitch position
(page [11]-16)
Stitch
Moving a block
(page [11]-20)
Modifying a
block
(page [11]-24)
Modifying stitch
length
(page [11]-39)
M3 feed angle
width setting
(page [11]-49)
Digital tension
setting
(page [11]-51)
PF holding
Modify
power setting
sewing
(page [11]-53)
quality
items
PF stroke
setting
(page [11]-55)
PF height
(page [11]-57)
Modifying the stitching
speed (page [11]-43)
Modifying code data
(page [11]-46)

[11] Modification mode

icon Details
The stitching start position
moves.
Deletes the designated
stitch.
Data for one stitch is added
at designated position
The position of the stitch is
modified
Data in a designated range
is moved.
The area between two
points to be modified is
modified with linear,
broken line, arc, curve,
zigzag or feed data.
The stitch length in the
designated range is
modified.
Sets the speed and angle
(operating speed) of the
feed plate on X and Y
axes.
Set the strength of the
tension.
Set the holding power
(torque) of Presser foot.
Set the stroke (amplitude)
of Presser foot.
Modify the height of the
Presser foot at the
specified position.
The stitching speed is
modified from the
designated stitch.
Code data is added to or
deleted from designated
stitch position.
[11]‐１
Details setting
-
Designated No. of Stitches
All After Designated Stitch
One Stitch Addition
Same Stitch Addition
<After modification position>
Fixed
Relative Movement
<Prior/Subsequent data>
Change
Add new stitch in between
-
Designated distance modification
All After Designated Stitch
-
-
-
-
-
Designated No. of Stitches
All After Designated Stitch
Add Delete