Modifying Stitch Length (All After Designated Stitch) - Mitsubishi Electric PLK-G-PAL Technical Manual

20.Modifying stitch length (All After designated stitch)

[Example] The stitch length from stitching data point A to the end of stitching is modified
as shown below. (3.0mm → 9.0mm)
Operation details
(1)Selecting the stitch length modification
Enter the modification mode.
►
Press Stitch Data Change
►
Stitch length modification
Press
►
(2)Determining the modification method and the modification start position
Set the method.
►
: Designated distance modification
: All After designated stitch
(In this case, press
Determine the position to be modified
►
with jog
modification (point A).
Press
►
(3)Setting the stitch length and confirming execution
Set the stitch length. (This will be "9.0mm" here.)
►
Press
►
and
.
to open the next screen.
)
. Set to the position to start
.
.
[11] - 41