Mitsubishi Electric PLK-G-PAL Technical Manual page 60

(2)Setting the reverse multiple stitching details
The details are set on this screen.
►
(Press and
and the number of times to 3.)
Press to set the data.
►
The system will return to the input method setting
►
screen.
Press to set the data.
►
The system will return to the arrow input screen.
►
Determine the B point with the linear input procedures, and create a linear line. (A straight line having
►
reverse multiple (stitching specification) will be created.)
After creating the linear line, input
►
(3)Confirming the data
Linear reverse multiple data has been created.
►
Memo Direction
When creating multiple stitching to the left of the input stitching line, press
When creating multiple stitching to the right of the input stitching line, press
Memo Distance
This is the distance between the multiple stitching and adjacent line. Set between 0.0mm and 20.0mm.
To input the distance data, press the DISTANCE icon to invert the icon. After that, input the data
using the numeric icons or the up/down arrow mark icons.
Memo Number of times
Set the number of multiple stitching layers. Set between 2 and 9. To input the number of times, press
the NUMBER OF TIMES icon to invert the icon. After that, input the data using the numeric icons or
the up/down arrow mark icons.
Memo Or press the MULTI, REVERSE MULTI, OFFSET icon on the arrow input screen to directly
display the MULTI, REVERSE MULTI, OFFSET setting screen.
, and set the distance to 6.0,
.
[7] - 30
(left side).
(right side).