Mitsubishi Electric PLK-G-PAL Technical Manual page 95

(4)Determining the block modification range (end point)
Using Jog
►
position.(B point)
Press .
►
Caution
the work holder will automatically return to the
start point. Take care when the needle is
lowered, etc.
(5)Confirming the data creation
Press .
►
(The block position will be modified.)
(6)Confirming the modified data
Quit the modification mode. Press
►
the Saving mode screen. Press
Standard screen after saving the data.
(When is pressed, the modifications executed
last will be undone.)
, , determine the end point
When the end point is determined,
to return to the
to change to
[11] - 24