Modifying Code Data (Adding Code Data) - Mitsubishi Electric PLK-G-PAL Technical Manual

24.Modifying code data (Adding code data)

Memo Refer to "Code data input" for a list of code data. [7]-21
[Example] The needle UP halt code (USTP) will be added to the D point of the following type of stitching data.
Operation details
(1)Selecting code data addition
Enter the modification mode.
►
Press Code Data Change
►
then press Code Data Add
Press
►
(2)Determining the code addition position
Using Jog
►
add the code.(D point)
Press
►
(3)Setting the code to add
Press Needle UP Halt
►
Press
►
,and
.
to open the next screen.
, , determine the position to
after determining the position.
.
.
[11] - 50