Mitsubishi Electric PLK-G-PAL Technical Manual page 44

(10)Confirming the data
Confirm the data. Press the jog icons (
►
so the sewing machine movement can be confirmed.
(Even if the data input has not been completed, if the
data input last has been set, the movement can be
confirmed in the same manner.)
If the data must be modified, refer to section [11]
►
Modification mode Modifying the stitching data.
Memo
If the distance between the curve start point and the end point is less than 0.5 mm, the pattern will
be regarded as the "closed pattern", and the same coordinate value will be automatically set for
both the start point and end point.
Precautions for inputting a curve
For shape data as shown below, continuous curve input is possible by selecting a delimiter point where
►
the corner is pointed (K point).
(This can also be applied for noncontinuous points such as for offset stitching, multiple stitching, and
reverse multiple stitching.)
)
[7] - 14