Mitsubishi Electric PLK-G-PAL Technical Manual page 150

"Short cut" icon of the sewing data is displayed on a standard
screen. This icon is displayed in reading order usually.
This order of the row can be freely permuted
in the "EDIT OF SHORT CUT" function. The example of
the operation method is shown below.
(1) Press the numeric key on "EDIT OF SHORT CUT" screen. ("8" in this example)
The data saved in an internal memory is displayed on the selection candidate group. (It is displayed from
800 to 809 in this example.)
(2) Selects the number that wants to be arranged to the short cut from the selection candidate group.
Selection
candidate
group
(3) After pressed when the selection candidate group is changed, press the numeric key. ("9" in this
example)
(4) Selects the number that wants to be arranged to the short cut from the selection candidate group.
(Short cuts can be selected up to 20.)
When the selection is completed, press
► The selection can be released by pressing the number that arranged in the short cut.
To release all the numbers arranged in the short cut, press
(The number cannot be inserted on the way of the short cut.)
(5) The short cut has been changed when returning to a standard screen.
"Short cut" icon
.
.
[13] - 4