2.Arc input
Operation points
▪ Designate arc input (
▪ Input three points (An arc, passing through the current position (already input) and two newly input
points, is created.)
[Example] The following type of sewing data will be created.
Operation details
(1)Inputting feed data to A point
Press
►
screen. After making the various settings on the Data
Setting Input screen, the Arrow Input screen will open.
(Refer to Page[6]-2)
Check that the code is set to FEED. If different code
►
is set, press
Press the arrow icons and move to the A point.
►
(Feed data to A point.)
(2)Setting feed data to A point
The movement amount can be confirmed.
►
Press
►
point A will be created.)
(3)Changing the input method
The movement amount will be cleared.
►
The code will change to "SEW".
►
If the stitching type is not
►
INPUT", (if the type is
INPUT"), press
(The currently set stitching type will be displayed on
the icon.)
)
and
on the Standard
and set the code to FEED.
to set the data. (Data on feed data to
"ARC
"LINEAR
and change the type.
[7] - 4