Mitsubishi Electric PLK-G-PAL Technical Manual page 99

(8)Moving from the modification origin jog position to
the modification position, and setting the data
Press the arrow icons and modify the position. (Move
►
to the D' point in this example.)
Press .
►
Caution
return to the modification origin jog position
(Needle position specified at (5.)).
Take care when the needle is lowered, etc.
(9)Quitting position modification
After determining all modification positions,
►
press .
(10)Confirming the data creation
To create the data, press
►
(The block position will be modified.)
Caution
return to the start point. Take care when the
needle is lowered, etc.
(11)Confirming the modified data
Quit the modification mode. Press
►
the Saving mode screen. Press
Standard screen after saving the data.
(When is pressed, the modifications executed
last will be undone.)
The work holder will automatically
The work holder will automatically
to change to
to return to the
[11] - 28