Explanations Of Basic Screen, Icons And Operation; Screen Configuration - Mitsubishi Electric PLK-G-PAL Technical Manual

[3] Explanations of basic screen, icons and operation

Note When power supply is turned on, if there is not sewing pattern data in the internal memory, the
message of [PATTERN DATA DOES NOT EXIST] is displayed. Press
is displayed.
Note When you adjust the contrast to make the operation panel screen easier to view, refer to Chapter 8,
"Adjusting the Liquid Crystal Contrast."(Page[3]-6)

1. Screen configuration

(1)Sample screen 1 (Standard screen 1)
(2)Sample screen 2 (While menu icon on Standard screen 1 is held down)
An explanation of the icon and
the screen will appear.
This icon (menu icon) is
pressed, so the icon will
be highlighted.
(3)Sample screen 3 (When menu is opened on Standard screen 1)
Writing data
Reading data
Program mode
Input/output setting
mode
[Line at top of screen]
Normal: Index
(simple explanation of screen)
When any icon is pressed:
The explanation for that icon will
appear. (Refer to sample screen 2.)
Some icons will continue execution while
the icon is held down.
Most icons will execute the operation
when the finger is released.
Function mode
[3] - 1
, then the standard screen
Methods of creating
stitching data
Modification mode
Data conversion
mode