Moving A Block (Changing The Prior/Subsequent Data) - Mitsubishi Electric PLK-G-PAL Technical Manual

13.Moving a block (Changing the prior/subsequent data)

[Example] The section between the D point and E point of the following type of stitching data will be moved to
the D' point to E' point. At this time, the data prior to and after the D' point to E' point will be changed.
Operation details
(1)Selecting block movement
Enter the modification mode.
►
Press Stitch Data Change
►
and Block Move
Press
►
(2)Determining the block modification range (start point)
Using Jog
►
position.(D point)
Press
►
(3)Determining the block modification range (end point)
Using Jog
►
position.
Press
►
Caution
the presser will automatically return to the start
point. Take care when the needle is lowered, etc.
.
to open the next screen.
, , determine the start point
.
, , determine the end point
.
When the end point is determined,
[11] - 19