Modifying A Block 1 (Linear Input) - Mitsubishi Electric PLK-G-PAL Technical Manual

15.Modifying a block 1 (Linear input)

[Example] The section between the A point and B point of the following type of stitching pattern will be
modified to a linear line.
Operation details
(1)Selecting block modification
Enter the modification mode.
►
Press Stitch Data Change
►
and Block Modify
Press
►
(2)Selecting the input type and the stitch length
Press Linear
►
►Set the stitch length. (Set to 3.0mm for this example.)
Press
►
(3)Determining the block modification range (start point)
Using Jog
►
position.(A point)
Press
►
.
to open the next screen.
.
to set the data.
, , determine the start point
.
[11] - 23