Modifying The Stitch Position (Position Of Subsequent Data Fixed) - Mitsubishi Electric PLK-G-PAL Technical Manual

11.Modifying the stitch position (Position of subsequent data
fixed)
[Example] The D point in the following type of stitching data will be moved.
Operation details
(1)Selecting stitch position modification
Enter the modification mode.
►
Press Stitch Data Change
►
and Stitch Position Modify
Press
►
(2)Determining the modification position
Using Jog
►
be modified.(D point)
Press
►
(3)Setting the modification method and modification amount
To set the method, press
►
(pattern data after modification stitch fixed), and move
to the modification position (point D') using the arrow
mark icons.
Press
►
(The stitch position will be modified.)
Memo Move the stitch length so that it is within the
range of 20mm at the maximum.
.
to open the next screen.
, , determine the position to
when the position has been set.
.
.
[11] - 15