(4)Setting and executing the conversion method
Select the direction. (In this case, select "right".)
►
Left direction
Right direction
Input the distance. (Input 7mm for this example.)
►
Press
►
.
(5)Completing the first conversion
Press
to start the second conversion.
►
(6)Selecting and confirming the next offset.
Using the arrow icons(
►
to be changed.
Press
after setting the data.
►
(7)Setting and executing the conversion method
Select the direction. (In this case, select "right".)
►
Left direction
Right direction
Input the distance. (Input 9mm for this example.)
►
Press
.
►
), select the offset
[12] - 16