(4)Determining the block modification range (end point)
Using Jog
►
position.(A point)
Press Jog Validity
►
Press
.
►
Caution
the work holder will automatically return to
the start point. Take care when the needle is
lowered, etc.
(5)Moving and setting the modification origin jog position
Using Jog
►
modified. (E point in this example.)
Press
.
►
(6)Moving from the modification origin jog position
to the modification position, and setting the data
Press the arrow icons and modify the position.
►
(Move to the E' point in this example.)
Press
.
►
Caution
return to the modification origin jog position.
Take care when the needle is lowered, etc.
(7)Moving and setting the modification origin jog position
Using Jog
►
modified. (F point in this example.)
Press
.
►
,
, determine the end point
.
When the end point is determined,
,
, move to the position to be
The work holder will automatically
,
, move to the position to be
[11] - 35