Explanations Of Standard Screen 1 - Mitsubishi Electric PLK-G-PAL Technical Manual

2. Explanations of Standard screen 1

The Standard screen 1 is explained in detail below.
... Home position return will be executed.
... The menu window will open
... The Image screen will open.
... The screen of setting for material thickness will open.
(*1) Presser bar lifting :
Caution
The stitching data is changed.
(Data in internal memory)
The stitching data type for the current work holder position is displayed.
(FEED, SEW, TRIM, etc.)
The current number of stitches is displayed.
The total number of stitches (including the feed data, thread cutting code, end code, and code
data) will be displayed.
The total number of actual stitches (excluding the feed data, thread cutting code, end code, and
code data) will be displayed.
The operation is confirmed (Jogging in forward/reverse direction)
(1) If the work holder is lowered after home position return and the forward jogging direction (upward arrow)
is pressed, the XY table (work holder) will move according to the stitching data. When the icon is
released, the operation will stop at that position. When the jog minus direction (downward arrow) is
pressed, the XY table (work holder) will move in the direction that the stitching data returns. When the
icon is released, the operation will stop at that position.
(2) Check pattern data is correct by jogging buttons, before press start pedal.
(3) During operation, the presser bar lifting will lower at stitching sections in the stitching data, and will rise
at the feed data sections.
Lowering the presser bar lifting when threading the needle is handy.
Turn the power OFF before threading the needle.
The pattern name is displayed. (Max : eight characters)
The pattern No. is displayed.
The sewing machine stitching speed is increased.
The current stitching speed setting value is
displayed. (0~9)
The sewing machine stitching speed is decreased.
The presser foot is moved up/down. (*1)
(The direction of the arrow (up/down) will change
according to the current state.)
Standard screen 2 opens.
[3] - 2