Code Data Input - Mitsubishi Electric PLK-G-PAL Technical Manual

7.Code data input

Operation points
▪ Designate code data input(
▪ Select and input the code data from the code data list
[Example] The following type of sewing data will be created.
Operation details
(1)Inputting a linear line from A point to B point
Input a linear line from the A point to B point using the linear input procedures.
►
(2)Inputting the code data (NEEDLE UP HALT)
Press
►
Press
►
(Refer to the code list of the next page.)
Press
►
(The "NEEDLE UP HALT" code will be created.)
The system will return to the arrow input screen.
►
(3)Inputting a linear line from B point to C point
Input a linear line from the B point to C point using the linear input procedures.
►
(4)Inputting the return end and the data completion
The return end is input and it is completion.
►
)
.
.
to set the code.
Input the "NEEDLE UP HALT" code at the B point
between the A-B point linear line and B-C linear line.
[Memo] Code data cannot be inserted when inputting
with a linear, circle, arc, curve or polygonal
line. To input, add the code data with the
modification mode. (Input between the linear
lines is possible as shown in the example.)
[7] - 20