Mitsubishi Electric PLK-G-PAL Technical Manual page 153

Combination mode
It is possible to combine and connect some stitching data.
Combination: It is possible to combine some stitching data. It is a function to bring some stitching data in
one group to sew with the specification order. After sewing each data, the following data is
sequentially sewn again by the start signal input.
Start
signal
Stitching
data 1
Stitching
data 2
Docking : It is possible to connect some stitching data. It is a function that ties some stitching data like one
data to sew with the specification order. Because it treats like one data after the start signal input, it
sews continuing individual data one after another.
Start
signal
Stitching
data 1
Stitching
data 2
■Specifying combination data
Enter the combination function to press
(1)
the key
(2) Select place where data is set (
the key
(Please stuff ahead sequentially and set the stitching data.)
(3) Select the stitching data that wants to add to the
combination, and then press the key
Note From among the data stored in an internal memory, up
to 20 stitching data items can be added to the
combination.
It can not add the stitching data that input second
home position cord.
(4) Stitching data (No.800 in this example) has been added.
on the function mode screen.
(In this example, two stitching data is combined.)
(In this example, two stitching data is connected.)
) and then press
[13] - 7
Set the stitching
data.