Methods Of Creating Sewing Data; Linear Input - Mitsubishi Electric PLK-G-PAL Technical Manual

[7] Methods of creating sewing data

Caution
icon is pressed. (If the needle is not at the UP position, it may lower once and then return to
the UP position.) By removing the presser bar lifting from sewing machine, data can be input
safety and accurately.
Basic Inputs
Function icon
Linear
([7]-1)
Arc
([7]-4)
Circle
([7]-8)
Curve
([7]-11)
Broken line
([7]-15)
Point
([7]-18)
Code
([7]-20)

1.Linear input

Operation points
▪ Designate linear input(
▪ Input two points (A linear line is created between the current position (already input) and the newly
input point.)
[Example] The following type of sewing data will be created.
Operation details
(1)Inputting feed data to A point
Press
►
screen. After making the various settings on the Data
Setting Input screen, the Arrow Input screen will open.
(Refer to Page[6]-2)
Check that the code is set to FEED. If different code
►
is set, press
Press the arrow icons and move to the A point.
►
(Feed data to A point.)
Note that the needle will rise to the UP position when the "Home position Return"
2-point input: A linear line is created between the current position (already input)
and the newly input point.
3-point input: An arc, passing through the current position (already input) and two
newly input points, is created.
3-point input: A circle, passing through the current position (already input) and two
newly input points, is created.
A curve passing through the current position (already input) and the input point
(up to 300 points possible) is created.
A broken line connecting the current position (already input) and the input point
(up to 300 points possible) is created.
The point can be input one stitch at a time.
* The distance between the points must be within 20mm.
The code by which various controls are done can be input.
)
and on the Standard
and set the code to FEED.
Explanation
[7] - 1