Modifying The Stitching Speed (All Sections After Designated Position) - Mitsubishi Electric PLK-G-PAL Technical Manual

22.Modifying the stitching speed
(All sections after designated position)
[Example] The stitching speed for all sections after the B point in the following type of stitching data will be
changed to medium-high speed(MD1).
Operation details
(1)Selecting stitching speed modification
Enter the modification mode.
►
Press Stitching Speed Change
►
Press
►
(2)Determining the modification method and the modification start position
Press All After Designated Stitch
►
Using Jog
►
position to be modified(B point).
Press
►
(3)Setting the speed and confirming execution
et the new speed (MD1).
►S
Press
►
(The stitching speed will be modified.)
to open the next screen.
, , determine the start point
after determining the positions.
.
.
.
[11] - 46