Mitsubishi Electric PLK-G-PAL Technical Manual page 27

(5)The "INPUT MODE" menu will open.
►When is pressed, the work holder will return to
the home position, and inputting of data will be
completed.(Data on feed data to the home position and the
end code will be created.)
Caution
return to the home position.
Take care when the needle is lowered, etc.
(6)A prompt for home position return will appear.
►Press
Caution
position. If the needle is not at the UP position, it may
lower once and then return to the UP position.
(7)
Select a saving method.
►After selecting the saving method, press
(Refer to "[5] Reading, writing and erasing data")
(8)The Standard screen will open.
►Return to the Standard screen and confirm the input data.
►This completes the input.
The work holder will automatically
The needle will rise to the UP
icon.
[6] - 3