Mitsubishi Electric PLK-G-PAL Technical Manual page 100

Designating the modification position without using jog icons
■
[Example] The C point and D point in the following type of data are each modified to the C' point and D' point.
Operation details
(1)Selecting block modification
Enter the modification mode.
►
Press Stitch Data Change
►
and Block Modify
Press to open the next screen.
►
(2)Selecting the input type and the stitch length
In this case, press Broken Line
►
►Set the stitch length. (Set to 3.0mm for this example.)
Press to set the data.
►
(3)Determining the block modification range (start point)
Using Jog
►
position.(B point)
Press .
►
.
.
, , determine the start point
[11] - 29
(Handy for newly creating data.)
´
´