Mitsubishi Electric PLK-G-PAL Technical Manual page 128

(4)Setting the back tacking details
The details are set on this screen.
►
(The details set here are,
(start/end back tacking)),
start mode
end mode
Press .
►
(5)Confirming execution of conversion
Quit the conversion mode. Press
►
the Saving mode screen. Press
the Standard screen after saving the data.
(When is pressed, the conversion executed
last will be undone.)
(N mode), five start stitches,
(M mode), three end stitches.)
to return to
to change to
[12] - 4