Modifying The Stitch Position (Subsequent Data Position Moved) - Mitsubishi Electric PLK-G-PAL Technical Manual

12.Modifying the stitch position (Subsequent data position moved)

[Example] The C point in the following type of stitching data will be moved. (The D, E, F and G points will
move)
Operation details
(1)Selecting stitch position modification
Enter the modification mode.
►
Press Stitch Data Change
►
Stitch Position Modify
Press
►
(2)Determining the modification position
Using Jog
►
modified.(C point)
Press
►
(3)Setting the modification method and modification amount
To set the method, press
►
(pattern data after modification stitch moved), and
Move to the modification position (point C') using the
arrow mark icons.
Press
►
(The stitch positions will be modified.)
Memo Move the stitch length so that it is within the
range of 20mm at the maximum.
and
.
to open the next screen.
, , determine the position to be
when the position has been set.
.
.
[11] - 17