Table of Contents
Advertisement
5. OPERATION PROCEDURES
With the exception of the
machine operation). (Cannot be changed even by pressing the keys.)
Straight Lock Stitching
(1) Standard lock stitching (manual stitching)
Press pattern number setting key
area
1 to select from patterns 1 to 3.
Setting the stitch edge: Turn all start backtacking buttons
(2) Fixed-stitch stitching
Press pattern number setting key
patterns 1 to 3.
Press the
key and setting the number of stitches for fixed-stitch stitching is valid.
Setting the stitch edge: Turn all start backtacking buttons
Setting the number of stitches for fixed-stitch stitching: Press the
Backtacking
Press pattern number setting key
display area
1
to select from patterns 1 to 3.
(1) Start backtacking
*Select the start backtacking type from the
selection keys ( 13 , 14 , 15 )
(Start backtacking is not performed if no selection is made.)
*Press the
illuminates and the number of backtacking stitches (A, B) displays at the stitch number display area ( 2 , 3 ).
While watching these values, set the number of stitches using the setting value selection keys ( 9 , 10 ).
(2) End backtacking
*Select the end backtacking type from the
( 16 , 17 , 18 ) (End backtacking is not performed if no selection is made.)
*Press the
illuminates and the number of backtacking stitches (C, D) displays at the stitch number display area
( 4 , 5 ). While watching these values, set the number of stitches using the setting value selection keys
( 11 , 12 ).
8 while watching pattern number display
and end backtacking buttons
8 while watching pattern number display area 1
and end backtacking buttons
Set the number of stitches using setting value selection keys
the LED
possible. (Manual stitching is performed if set to "0".)
8 while watching pattern number
key ( 6 ) to set the number of start backtacking stitches. The
key ( 6 ) to set the number of end backtacking stitches. The
keys, all key operations are disabled during stitching (during
illuminates. A setting value of "0" to "9999" is
. start backtacking
end backtacking selection keys
3
2
9
10
- 5 -
OFF.
to select from
OFF.
key to change the display to "N".
9 , 10 , 11 , 12 when
4
5
12
11
1
8
1
8
LED
LED
Advertisement
Table of Contents
