Table of Contents
Advertisement
Setting Up the Machine
Setting Up the Machine
Turning the machine on
WARNING
• Use only regular household electricity for the power
source. Using other power sources may result in fire,
electric shock, or damage to the machine.
• Do not touch the plug with wet hands. Electric shock
may result.
• Make sure that the plugs on the power cord are firmly
inserted into the electrical outlet and the power cord
receptacle on the machine. Otherwise, a fire or electric
shock may result.
• Turn the main power to OFF and remove the plug in the
following circumstances:
• When you are away from the machine
• After using the machine
• When the power fails during use
• When the machine does not operate correctly due to
a bad connection or a disconnection
• During electrical storms
CAUTION
• Use only the power cord included with this machine.
Otherwise, a fire or electric shock may result.
• Do not use extension cords or multi-plug adapters with
any other appliances plugged into them. Fire or electric
shock may result.
• When unplugging the machine, always turn the main
power to OFF first. Always grasp the plug to remove it
from the electrical outlet. Pulling on the cord may
damage the cord, or lead to fire or electric shock.
• Do not allow the power cord to be cut, damaged,
modified, forcefully bent, pulled, twisted, or bundled. Do
not place heavy objects on the cord. Do not subject the
cord to heat. These things may damage the cord, or
cause fire or electric shock. If the cord or plug is
damaged, take the machine to your authorized Brother
dealer for repairs before continuing use.
• Do not insert the plug on the power cord into an
electrical outlet that is in poor condition.
• (For U.S.A. only)
This appliance has a polarized plug (one blade wider
than the other). To reduce the risk of electrical shock,
this plug is intended to fit in a polarized electrical outlet
only one way. If the plug does not fit fully in the electrical
outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper electrical outlet.
Do not modify the plug in any way.
12
1
Make sure that the machine is turned off (the main
power switch on the back of the machine is set to
"O"), and then plug the power cord into the power
supply jack under the main power switch.
2
Insert the plug of the power cord into a household
electrical outlet.
b
a Power supply jack
b Main power switch
3
Press the right side of the main power switch to turn
the machine on (set it to "I").
To turn off the machine, press the left side of the main
power switch (set it to "O").
a
Advertisement
Table of Contents
