Stopping Embroidering - Brother PR670E Operation Manual

Stopping embroidering

The machine can be stopped during sewing.
■ Temporarily pausing
a Press the start/stop button.
 The machine stops and the start/stop button lights up
in red.
• Embroidering can also be stopped by touching an
area displaying the pattern.
• The thread is not trimmed.
• To continue sewing, after checking that the upper
thread is taut, touch the unlock key, and then press
the start/stop button.
Memo
• If the Reserve Stop key is touched while
embroidery is being sewn, the machine
stops sewing before the next color begins.
(Refer to "Stopping the machine at the next
color change" on page 117.)
• Before starting to sew, the machine can be
set to stop at any thread color change.
(Refer to "Specifying pause locations before
embroidering" on page 118.)
EMBROIDERING TUTORIAL
■ Resume sewing after the machine
was turned off
a Press the start/stop button.
 The embroidery machine stops and the start/stop
button lights up in red.
• The thread is not trimmed.
b Touch to unlock the embroidery
machine.
c Press the thread trimming button.
 The bobbin and upper threads are trimmed.
• Before turning off the embroidery machine, be sure to
trim the threads.
2
59